Reader Technology that Matters.
At IDFACTORS, we don’t build Readers that can only read a card number. We build Readers that authenticate the issuer and the data so a rogue card cannot be used for access.
THIS MATTERS because Mag-stripe, Prox and even PIV-I cards have a limited “cover time” before they become the data source for a rogue card.
Whether Wiegand or OSDP, 1-Factor or multi-factor, it is essential to implement a card and reader technology that eliminates the risk of cloned credentials.
1-Factor Contactless Reader Commercial Grade
IDFACTORS newest Contactless Reader is the benchmark for architectural design and high security performance.
- Reads CAC, PIV, TWIC, PIV-I, Mifare, DESfire, PKPACS and PACSID Cards
- On-board CAK challenge-response with RSA-2048; verifies the certificate private key on the CAC, PIV, PIV-I, PK-PACS and PACSIDTM cards.
- Configurable from Wiegand to OSDP Interface
- Optional Dual-Technology Module reads 125-KHz Prox (26-bit and 37-bit formats). Prox reading can be disabled on demand.
- Optional FIPS-201 Crypto Module accelerator supports RSA-1024, RSA-2048, SHA-1, SHA-2, AES 128 & 256, 3DES and Random Number Generation
- Card Read Range: Up to 2.5”
- Card Read Speed: Under 2-seconds in CAK challenge-response mode
- Indoor or outdoor installation
1-Factor Contact, Contactless and Dual-Interface Government and Industrial Grade Readers
The most versatile, secure, industrial strength 1-Factor Card Readers for Government and Industry
- Indoor or outdoor installation
- Industry leading read range and speed
- Contact-Only Interface model is for high security where there is a potential for RFID “sniffing”
- Dual Interface provides access redundancy for a faulty card antenna
- Normally closed shutter protects contact slot from rain and debris
- Supports CAC, PIV, TWIC, PIV-I,
Mifare, DESfire PK-PACS and PACSID - Selectable Wiegand or OSDP modes
- Native CAK challenge-response;
verifies the certificate private key on
CAC, PIV, PIV-I, PKPACS and PACSID
cards. - Trusted signing certificates are
compiled into Wiegand readers and
downloaded to OSDP readers
Contact Interface
Contactless Interface
Dual Interface
2-Factor Contact, Contactless and Dual-Interface Readers for NIST Limited Access Areas.
The most flexible and trusted 2-Factor Readers used by the Federal Government and Critical Infrastructure.
- Available in Contact, Contactless or
Dual Interface Models - Indoor or outdoor installation
- Contact slot incorporates a shutter
to protect against rain and debris - Optional Dual Technology Module
reads 125 KHz Prox Cards - Configurable PIN to Card, Pin to
Panel or pin Pass-through modes - Selectable Wiegand or OSDP modes
- Supports CAC, PIV, TWIC, PIV-I, Mifare,
DESfire PK-PACS and PACSID - Native CAK challenge-response;
verifies the certificate private key on
CAC, PIV, PIV-I and PACSID cards. - Executes CAK verify in 1-Factor Mode
and PAK verify in 2-Factor Mode - Optional FIPS-140 Crypto Module for
FICAM Compliance - PKI certificates can be compiled
(Wiegand) or downloaded (OSDP)
Contact Interface
Contactless Interface
Dual Interface
2-Factor Contact, Contactless and Dual-Interface Readers with Display for Dynamic Use Areas.
The most advanced 2-Factor Reader available for use in high security centers where users need to know.
- High-visibility OLED Display auto resets to 2,
3 or 4 lines for message length - Messaging informs the user of threat status,
authentication modes, etc. - Selectable Wiegand or OSDP modes
- Programmable at Reader or via OSDP
- Available in Contact, Contactless or Dual
Interface Models - Configurable PIN to Card or Pin to Panel
- Indoor or outdoor installation
- Native CAK challenge-response; verifies the
certificate private key on CAC, PIV, PIV-I and
PACSID cards. - Executes CAK verify in 1-Factor Mode and
PAK verify in 2-Factor Mode - Optional FIPS-140 Crypto Module for FICAM
Compliance - Trusted signing certificates can be
compiled into Wiegand readers or
downloaded via OSDP - Optional Dual Technology Module reads 125
KHz legacy Prox cards - Red, Green and Yellow status LEDs
Contact, Contactless or
Dual Interface
3-Factor Readers with high-visibility Display and FIPS BIO Scanner for Very High Security Use Areas.
Designed for installations requiring Very High (Level 3) Security and TWIC access applications. Ideal for securing SCIF rooms, server rooms and labs.
- Card + PIN + BIO match verification
- High-visibility OLED Display auto resets
by message to 2, 3 or 4 lines - Messaging informs the user of threat
status, authentication modes, etc. - Selectable Wiegand or OSDP modes
- Display messaging programmable at
Reader or via OSDP - Available in Contact, Contactless or Dual
Interface Models - Supports CAC, PIV and TWIC Cards,
including TWIC Private Key and
Contactless Biometric - Configurable PIN to Card or Pin to Panel
- Indoor or outdoor installation
- Optional FIPS-140 Crypto Module for
FICAM Compliance - Secugen FIPS-201 and FBI approved
Biometric Scanner - Red, Green and Yellow status LEDs
Contact, Contactless or
Dual Interface
General Specifications
