TrustPoint Reader Compatibility Guide
Credentials and access systems vary widely. IDFactors configures TrustPoint Readers for your credentials and compatible legacy access systems before shipping. That saves time on site and helps protect against cloned badges when the reader is configured for PKI authentication.
Reader models by authentication and card interface
Contact readers take an inserted card. Contactless readers accept a tap. Dual-interface models can use either method. The product ordering tables identify the part number for each available combination.
| Reader | Authentication factors | Card interface | PACS interface | PIN options | PKI verification |
|---|---|---|---|---|---|
| Series 73 | Card | Contactless | Wiegand or OSDP | No keypad | CAK only |
| Series 74 | Card or Card + PIN | Contact, contactless or dual interface | Wiegand or OSDP | PIN to Card or PIN to Panel on keypad models | CAK or PAK with PIN |
| Series 75 | Card + PIN or Card + PIN + biometric | Contact, contactless or dual interface | Wiegand or OSDP | PIN to Card or PIN to Panel | CAK or PAK with PIN |
Options vary by model and configuration. CAK means card authentication key, and PAK means PIV authentication key. See the full product catalog (PDF).
A documented PACS integration
GSA lists the IDFactors PIV Dual Interface Reader with Keypad (OSDP), part number 74-12-2003, as APL #10191. The approval covers the tested embedded authentication configuration with LenelS2 OnGuard 8.3 (APL #10112) and HID pivCLASS 5.36.1 (APL #10113). Use the letter to check the listed controllers, interface modules and reader versions.
Read the GSA approval letter (PDF). Check the current Approved Products List.
Request a reader configured for your site
Tell us your controller, credential types, reader interface and required authentication factors. If the door uses a keypad, include how you want the PIN handled.
Ask about compatibility Plan a one-door pilot